The Clover Fountain creates a bold, eye-catching display that appeals to both sight and sound. A prominent central spray rises upward while four angled streams spread outward in a clover-inspired formation, producing a graceful and lively pattern across the water. Add a four-light LED set, and the fountain becomes a stunning focal point once the sun goes down.
A sturdy brass center nozzle sends water up to 40 feet high, while the overall spray can extend as wide as 45 feet. For those looking to cover a larger area, larger Clover Fountain models are available for expansive ponds.
In addition to its decorative impact, this fountain supports water quality by promoting circulation and boosting oxygen levels — key factors in maintaining a balanced aquatic environment.
Made in the USA: All Scott Aerator Company fountains, aerators, AquaSweeps, and de-icers are proudly made in Holland, Michigan and carry an unconditional 5-year motor warranty. These products are manufactured using a stainless-steel, oil-free, submersible motor, making them among the most environmentally friendly pond products on the market. There is no oil to change, no maintenance required, and no control box needed. Like all Scott Aerator fountains and aerators, the Clover Fountain is designed for use in both fresh and salt water.
115 V: 100 feet in length, 10-gauge, submersible, with plug
230 V: 100 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 20-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
40-inch minimum pond depth required
Spray dimensions: 25' high by 30' wide
Clover Fountain 1 hp
1-hp, 115 or 230 V, oil-free motor
60 Hz, single-phase, 3,450 rpm (0.75 kW)
Current draw:
115 V: 11.5 amps
230 V: 8.2 amps
Also available in 3-phase and/or 50 Hz versions
75 gallons-per-minute flow rate
5-year motor warranty
Easy installation
Electric power cord provided:
115 V: 100 feet in length, 10-gauge, submersible, with plug
230 V: 100 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 35-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
44-inch minimum pond depth required
Spray dimensions: 30' high by 38' wide
Clover Fountain 1½ hp
1½-hp, 230 V, oil-free motor
60 Hz, single-phase, 3,450 rpm (1.1 kW)
Current draw:
230 V: 10.6 amps
Also available in 3-phase and/or 50 Hz versions
90 gallons-per-minute flow rate
5-year motor warranty
Easy installation
Electric power cord provided:
230 V: 100 feet in length, 12-gauge, submersible
Electric power cord can be ordered in greater lengths
Approved for salt water
Light kits can be added at purchase or later
Two 45-pound weights or concrete blocks required for anchoring (not included)
Two nylon ropes required for anchoring (not included)
Designed for 24-hour-per-day operation
No maintenance required
50-inch minimum pond depth required
Spray dimensions: 40' high by 45' wide
Safety & Compliance: A GFCI (Ground Fault Circuit Interrupter) is required. Always disconnect power when swimmers are present. Each Clover Fountain is ARL-tested and fully compliant with UL standards and the National Electric Code when installed as a complete package.
Pond Fountain Comparison Brochure (PDF)
